← Back to software

Tech guides ·

How to choose a CPU cooler: air or liquid, size and compatibility

A cooler decides more than how hot the processor gets. It also decides how loud the PC is and how long the processor holds its top clock. A weak cooler on a powerful processor means roaring fans and lost performance, while an expensive one on a simple processor is money thrown away. Here is what kinds of coolers exist, how to match one to your processor and case, and what to check before buying.

1. Why the cooler matters

Modern processors raise their clock by themselves while the temperature allows it. The better the cooling, the longer the high boost lasts and the quieter the fans run. The coolers that come in the box only suit simple processors and office work: under gaming load they get loud and hold the processor back. Many processors come with no cooler at all.

2. Types of coolers

Type What for Notes
Low profile Small cases, office and media PCs Fits almost anywhere, but cools weakly
Single tower, one fan Most gaming PCs Best balance of price, noise and cooling
Dual tower Powerful processors, quiet builds Cools almost like an AIO, but big and heavy
AIO 240 / 280 mm Powerful processors, compact cases with room for a radiator Frees space around the socket, has a pump
AIO 360 / 420 mm The hottest processors, workstations Maximum cooling, needs a suitable case

3. How to match a cooler to the processor

Processor Enough
Ryzen 5, Core Ultra 5, processors up to 65 W A simple tower with 4 heat pipes
Ryzen 7, Ryzen 7 X3D, Core Ultra 7 A good tower with one or two fans, or a 240 mm AIO
Ryzen 9, Core Ultra 9 A dual tower or a 280–360 mm AIO
  • Do not trust the “250 W TDP” on the box. Every brand measures it differently, so you cannot compare coolers from different brands by it. Look at independent tests instead.
  • X3D processors do not draw that much power, but the heat comes from a small area, so they still need a good cooler. If you plan to use PBO, get cooling with some headroom, see our guide to PBO on X3D.
  • If you lower the processor voltage, a simpler cooler will do, see our CPU undervolting guide.

4. Compatibility: what to check

  • Socket. Most AM4 coolers fit AM5 and mount on the board’s stock backplate. Intel LGA1700 and LGA1851 share the same mounting, and manufacturers such as Noctua have confirmed that these coolers also fit the new LGA1954 socket.
  • Tower height. The case specification lists the maximum cooler height. Leave at least 5 mm of margin.
  • Memory. A wide heatsink can hang over the first memory slot. Tall RGB modules sometimes get in the way of the fan.
  • AIO radiator. Check where the case can take a 240, 280 or 360 mm radiator and whether it clashes with memory, the motherboard or the graphics card.

5. Air or liquid cooling

  • Air cooler: cheaper, more reliable, lasts for decades, nothing in it can break except the fan.
  • AIO: handles very hot processors better, looks good and frees space around the socket. But the pump wears out over time, ready-made AIOs usually last several years, and pump noise can be noticeable.
  • How to mount an AIO: the radiator must be higher than the pump, otherwise air collects in the pump and makes noise. The best places are the top, or the front with the tubes at the bottom.
  • For most gaming builds a good air tower is the most sensible choice.
Why dust is a problem: air has to flow freely through the case
cool air inhot air outGPUCPU

Clogged filters and fins block this path, so the parts get hotter.

6. Noise

  • 140 mm fans are quieter than 120 mm ones at the same airflow.
  • Choose fans with a 4-pin (PWM) connector: their speed is controlled smoothly.
  • Decibel figures on the box are almost always optimistic, rely on tests.
  • Set up a fan curve so the PC does not roar at idle, using our guide.

7. Installation

  1. Remove the protective film from the cooler base. This is the most common and most annoying mistake.
  2. Apply thermal paste correctly, see our thermal paste guide.
  3. Mount the fan so it blows towards the back of the case, with the general airflow.
  4. Tighten the screws evenly, crosswise.
  5. After building, check the temperatures using our guide.

8. Common mistakes

  • Choosing a cooler by the TDP figure on the box.
  • Not checking the cooler height and radiator space in the case.
  • Forgetting to remove the film from the base.
  • Mounting the AIO radiator below the pump.
  • Buying a 360 mm AIO for a 65 W processor.
  • Putting a powerful cooler into a case without fresh air intake.

Do not want to sort out compatibility yourself? Build your PC in the configurator, and we will pick the cooling for your processor and case.