← Back to software

Tech guides ·

PBO on Ryzen X3D: what it is and whether you need it

Every Ryzen motherboard BIOS has a PBO option, and there is a lot of confusion around it: some people switch it on “for FPS”, others are afraid to touch it. Owners of X3D processors ask the most questions, because on these chips cache matters more than clock speed. Here is what PBO is, where it works, where it does not and whether it makes sense on X3D.

1. What PBO is

Every Ryzen has Precision Boost: the processor raises its clock by itself until it hits one of the factory limits for power, current or temperature. Precision Boost Overdrive (PBO) moves these limits, so the processor holds high clocks for longer. It is not manual overclocking: the processor still controls its clock and voltage, PBO only gives it more room.

PBO contains several settings:

  • PPT, TDC, EDC: power and current limits. The higher they are, the more power the processor may draw.
  • Boost Override (+MHz): raises the maximum boost clock, usually by up to +200 MHz.
  • Scalar: allows slightly higher voltage. It rarely helps, better leave it on Auto.
  • Curve Optimizer: shifts the frequency-voltage curve. A negative value is an undervolt: the same clock at a lower voltage, which means less heat and a higher boost.
  • Curve Shaper: finer tuning of the same curve on Ryzen 9000.

2. Why it was created

Factory limits are designed for any cooler and any motherboard. With good cooling and a strong board, the processor could run faster but runs into a limit. PBO removes that restriction. Long multi-threaded loads gain the most: rendering, video encoding, compiling. In games the processor rarely loads all cores, so the gain there is much smaller.

What a good undervolt gives (typical range)
Power draw
−10…25%
Temperature
−5…15 °C
Speed
±2%
stockafter undervolting

Illustration: every chip is different, some gain more and some less.

3. PBO on different X3D processors

Processors PBO and limits Curve Optimizer Manual overclocking
Ryzen 7 5800X3D, 5700X3D No Not officially No, memory only
Ryzen 7000X3D (7800X3D, 7900X3D, 7950X3D) Partly, voltage is capped Yes, negative only No
Ryzen 9000X3D (9800X3D, 9850X3D, 9900X3D, 9950X3D) Yes, fully Yes, plus Curve Shaper Yes

4. Why X3D is different

X3D processors get extra cache stacked as a layer on the chip. On Ryzen 5000X3D and 7000X3D this layer sits on top of the cores and gets in the way of heat transfer, so AMD capped the voltage and locked overclocking. On Ryzen 9000X3D the cache moved under the cores, cooling improved and the processors were fully unlocked.

The second difference: X3D chips are fast in games mainly because of the cache, not the clock. So even on a fully unlocked 9800X3D the gain from PBO in games is small: in tests with PBO and +200 MHz the average FPS rose by about 2.7% and the 1% lows by about 5%, while power draw went up by about 20 W.

5. Should you turn on PBO on X3D

  • 5800X3D, 5700X3D: there is no PBO. You can only enable the memory profile and keep an eye on temperatures.
  • 7800X3D and other 7000X3D: raising the limits is almost useless, the processor hits its voltage cap. What helps is a negative Curve Optimizer: the processor runs cooler and quieter and holds higher clocks.
  • 9800X3D, 9850X3D and other 9000X3D: a sensible setup is PBO with +200 MHz and a negative Curve Optimizer. The gain in games is small but free, if the cooling can handle it.
  • Better not to turn it on if you have a weak cooler, a small case or want a quiet PC: the processor will run hotter while FPS barely changes.
  • Keep in mind that overclocking, PBO included, can void the processor warranty under AMD’s terms.

6. Step-by-step setup

  1. Update the BIOS to the latest version using our instructions: newer AGESA versions have fewer PBO bugs.
  2. Enable the memory profile as described in our XMP / EXPO guide. On X3D this gives more than PBO itself.
  3. Find the Precision Boost Overdrive section in the BIOS (usually under overclocking or AMD Overclocking) and set it to Advanced.
  4. For 9000X3D: leave the limits on Auto or Motherboard and set Boost Override to +200 MHz. For 7000X3D, do not touch the limits.
  5. Curve Optimizer: All Core mode, Negative sign, value 10.
  6. Check stability with the programs from our list of tests and play for a couple of hours: errors often appear at idle or under light load.
  7. If everything is stable, raise the value to 15–20 and test again. If you get crashes or restarts, go back to the previous value.
  8. Watch temperatures using our guide.

More about lowering voltage and power limits on Ryzen and Intel in our CPU undervolting guide.

7. Where PBO does not work or is limited

  • On Ryzen 5000X3D: PBO features are locked for them.
  • On A620 motherboards: overclocking features are cut down and PBO is often unavailable.
  • In laptops: PBO settings are usually hidden by the manufacturer.
  • On Intel processors: PBO is an AMD feature, Intel has its own limit settings.
  • When cooling cannot keep up: the processor hits its temperature limit and there is no gain.

8. Common mistakes

  • Setting Curve Optimizer to −30 on all cores straight away.
  • Checking stability with only one short test.
  • Expecting 10–20% more FPS from PBO on X3D.
  • Turning on PBO with a weak cooler.
  • Forgetting that a BIOS update resets the PBO settings.
  • Raising limits on a 7800X3D and wondering why nothing changed.

Want a gaming X3D build that is already tuned? Choose the parts in the PC configurator, and we will assemble and test the computer for you.