← Back to software

Tech guides ·

AMD Adrenalin and NVIDIA App: what to turn on and what to leave alone

Every graphics driver now comes with its own control app: NVIDIA App for GeForce cards and AMD Software: Adrenalin Edition for Radeon. They update the driver, show FPS and temperatures, record gameplay and switch on features such as upscaling and frame generation. Most people install them and never open them, or switch on everything at once. Below is what each app does, what is worth turning on and what is better left alone.

1. What these apps are

  • NVIDIA App replaced GeForce Experience and is gradually taking over the settings of the old NVIDIA Control Panel. You no longer need an account to use it.
  • AMD Software: Adrenalin Edition is installed together with the Radeon driver. It holds all graphics settings, tuning, recording and the in-game overlay in one window.
  • Both apps work without being open all the time: the settings you choose are stored in the driver.

2. Installation

  1. Download the app only from nvidia.com or amd.com. Driver “packs” from other sites are the most common source of problems.
  2. NVIDIA: install the NVIDIA App, then install the newest Game Ready driver from its Drivers tab.
  3. AMD: run the installer or AMD Install Manager and choose the full Adrenalin install. Optional extras such as the AI Bundle are not needed for gaming, you can skip them.
  4. On a laptop, the manufacturer’s driver is often the safer choice, because it is tested with that particular cooling and power setup.
  5. If you are moving from one GPU brand to another, or the driver behaves strangely, do a clean reinstall as described in our guide to updating drivers.

3. NVIDIA App and Adrenalin side by side

Feature NVIDIA App AMD Adrenalin
In-game overlay Alt+Z Alt+R
FPS, temperatures, load Statistics overlay Performance metrics overlay
Recording and instant replay Yes Record & Stream
Upscaling from the driver DLSS overrides FSR upgrade, RSR
Frame generation from the driver Frame Generation override (RTX 50) AFMF
Lower input lag Low Latency Mode (Reflex in games) Anti-Lag
Automatic tuning Automatic tuning Performance Tuning presets
One-click profile Optimal settings per game HYPR-RX

4. NVIDIA App: what to turn on

  • Graphics, DLSS overrides: lets a game use a newer DLSS model than the one it shipped with. “Recommended” picks the newest model. On RTX 20 and 30 cards the newest models cost more performance, so if FPS drops, choose the previous model in “Custom”.
  • Frame Generation Mode override: only for RTX 50 cards and only in games that already have DLSS Frame Generation. It raises FPS but adds latency, see our guide to DLSS, FSR and frame generation.
  • Optimal settings: a quick start for people who do not want to tune each game. Fine to use, but your own settings are usually better.
  • Overlay (Alt+Z): switch on the statistics overlay to watch FPS, GPU load and temperature while playing.
  • Instant Replay: records the last minutes in the background. Turn it on only if you really clip moments, because it uses disk space and a little performance.
  • Auto Shader Compilation (beta): rebuilds DirectX 12 shaders after a driver update while the PC is idle, so games load faster.
  • Debug Mode (System, Advanced) instantly removes all overclocking and voltage changes. Useful when the PC crashes and you are not sure why.

5. AMD Adrenalin: what to turn on

  • Gaming, Graphics: settings can be global or per game. Start with the global profile and change single games only when needed.
  • HYPR-RX: one switch that turns on several features at once. Quick, but it also enables things you may not want in every game, so check what it switched on.
  • Anti-Lag: worth turning on in competitive games, it lowers input lag.
  • Radeon Chill: limits FPS when you are not moving much. Good for quiet, cool and efficient play; leave it off in shooters.
  • FSR upgrade: lets supported games use the newer ML-based FSR 4 upscaler instead of the one built into the game. It needs a recent card (RX 9000, and with the latest drivers FSR 4.1 also on RX 7000 and RX 6000) and a game with FSR 3.1.
  • AFMF (driver frame generation): doubles FPS in many games without developer support, but adds latency and works best from 60 FPS upwards.
  • RSR: driver-level upscaling for games without FSR. The picture is softer than with FSR built into the game.
  • Performance, Tuning: automatic undervolt and overclock presets. For manual settings, see our guide to GPU overclocking and undervolting.
  • Record & Stream and the metrics overlay work like NVIDIA’s: turn on only what you use.
  • After a driver update, check that Smart Access Memory is still on (it can switch off on Windows 10). How it works is explained in our guide to Resizable BAR.
How many pixels the card really draws (4K screen)
Native
3840×2160 → 4K · scale 100%
Quality
2560×1440 → 4K · scale 67%
Balanced
2227×1253 → 4K · scale 58%
Performance
1920×1080 → 4K · scale 50%
Ultra Perf.
1280×720 → 4K · scale 33%

The rest of the picture is rebuilt by DLSS / FSR / XeSS. Fewer pixels to draw = more FPS.

6. What not to switch on everywhere

  • Frame generation from the driver (AFMF or the NVIDIA override) in competitive shooters: more FPS on the screen, but slower reaction. In online games, latency matters more, see also how to lower ping and lag.
  • Two overlays at once, for example the app’s overlay together with MSI Afterburner or Steam: this causes flickering and crashes in some games.
  • Automatic overclocking together with manual settings from another program: only one tool should control the card.
  • Sharpening and filters globally: set them per game, they do not suit every picture.

Detailed driver settings for games, such as V-Sync, low latency mode and shader cache, are covered in our guide to NVIDIA and AMD graphics settings.

7. If something goes wrong

  1. Games crash or the screen goes black: switch off automatic tuning (Debug Mode in NVIDIA App, “Default” in AMD Tuning).
  2. Settings were reset after an update: this happens with major driver versions, check your profiles again.
  3. The app does not start or shows errors: reinstall the driver with a clean install.
  4. Problems began after a new driver: go back to the previous version until a fix comes out.

8. Common mistakes

  • Downloading drivers from third-party sites.
  • Turning on every feature “just in case”.
  • Using frame generation in competitive games.
  • Running two overlays or two tuning programs at once.
  • Never checking settings after a big driver update.
  • Expecting DLSS or FSR overrides to work in games that do not support them.

Choosing between GeForce and Radeon for a new build? Compare options in the PC configurator, and we will assemble a ready-to-play computer for you.